Generator Instructions

The device may be switched on and off by pressing the arrow button
The device will switch off automatically after 25-30 seconds of inactivity.
Press the arrow button to delete the last number entered.
The code generator’s battery is non-replaceable. When the battery runs out, you will see a number 5 on the generator display which will count down to 0 (0 means the battery is completely dead). If your battery runs out, contact us to get a replacement.

Using a code generator for the first time

• Turn on the code generator by pressing the arrow button .
• On the generator screen you will see _ _ _ _ PIN. Enter a four-digit PIN of your choice.
• The generator screen will now display _ _ _ _ PIN CONF. Re-enter your new PIN to confirm.
• If the PIN has been successfully set, you will see NEW PIN CONF on the code generator screen.

If done incorrectly, the generator screen will show FAIL and it will suggest that you repeat the process.

Change your PIN

• Turn on the code generator by pressing the arrow button .
• On the code generator screen you will see _ _ _ _ PIN.
• The generator screen will now display APPLI _. Press and hold the arrow button until you see _ _ _ _ NEW PIN on the screen. Enter a new four-digit PIN.
• On the code generator screen you will see _ _ _ _ PIN CONF. Re-enter your new PIN to confirm.
• If the PIN change was successful, you will see NEW PIN CONF on the code generator screen.

If the new PIN has been entered incorrectly, you will see FAIL on the screen and the code generator will suggest that you repeat the process.

Signing in to a Pervesk account with a code generator

• In the login window (https://ib.pervesk.lt), select login with Digipass.
• Enter your User ID and press Enter.
• Turn on the code generator by pressing the arrow button .
• On the code generator screen you will see _ _ _ _ PIN. Enter your PIN.
• The screen will now display APPLI _. Press 1.
• Enter the code provided on Pervesk’s page into the code generator.
• A new code will appear on the generator. Enter it into Pervesk’s page.

Payments using a code generator

• Turn on the code generator by pressing the arrow button .
• On the code generator screen you will see _ _ _ _ PIN. Enter your PIN.
• The generator screen will now display APPLI _. Press 2.
• Enter the code provided on Pervesk’s page into the code generator.
• A new code will appear on the generator. Enter it into Pervesk’s page.

The code generator is your personal device. Never give the generator or reveal its PIN or other generated codes to other persons. Pervesk never asks you to provide this information via email, telephone, SMS or other communication channels.
Tip: Use a PIN that is easy for you to remember but difficult for others to guess. Do not write down the PIN code.